Short answer: the closest swap for Lava 20 is another one-part, moisture-curing polyurethane membrane such as DESMOFLEX PU from Thrakon. For specified commercial work, Sikalastic-625 N is the obvious system alternative. For a large, simple flat roof, torch-on felt, EPDM or GRP will often cost less per square metre than any liquid.

What Lava 20 actually is

Lava 20 is made by Owl Waterproofing. Its European Technical Assessment, ETA 22/0640, describes it as a single-component polyurethane that cures to an elastomeric membrane, fully bonded to the substrate, with or without an internal mesh. The kit is Owl Universal Primer, the Lava 20 membrane, an optional Lava 20 Catalyst for thick layers, and a Lava 20 Top Coat. The ETA sets a minimum thickness of 1.0 mm without mesh and 1.2 mm with mesh.

In Ireland it is stocked by builders merchants such as TJ O'Mahony, which lists the 15kg grey tin (sold as about 6m²) at €209.95 and a 2-4m² kit at €159.95 (checked 29 October 2026). That works out at roughly €35 per square metre for the membrane alone on the merchant's own coverage figure, before primer and top coat.

So any real alternative needs to do the same job: a cold-applied, seamless, fully bonded membrane for flat roofs, balconies, gutters, upstands and awkward details where sheet membranes are slow to dress.

Lava 20 alternatives at a glance

OptionTypeBest forPrice seen
DESMOFLEX PUOne-part PU, moisture curingDirect swap on flat roofs, balconies, terraces, ponding areas€70 (6kg), €150 (15kg), €250 (25kg)
Sikalastic-625 NOne-part PU, glass fibre reinforced systemSpecified work where a BBA or ETA backed system is asked forThrough Sika stockists
D-FLEX ClearClear aliphatic PUSealing tiles, glass, stone or timber without lifting them€140 (5L)
Torch-on SBS feltSheet, bituminousLarger, simple flat roofs and full strip-and-relay jobs€50 per cap sheet roll
EPDM or GRPSheet rubber or fibreglass laminateGarage and extension roofs, no naked flameGet supplier quotes

DESMOFLEX, D-FLEX and felt prices are as listed in our liquid roofing and roofing products sections from The Roofing Shop. Prices change, so confirm with the supplier before you price a job.

DESMOFLEX PU: the like-for-like swap

DESMOFLEX Polyurethane from Thrakon is the closest match to Lava 20 on chemistry. It is a one-component, solvent-based PU that cures with air humidity and moisture in the substrate, forming a seamless, elastic, fully bonded membrane. The manufacturer's description says it holds up to UV, thermal cycling and ponding water, handles frost, and complies with EN 1504-2 for coating and protecting concrete. It suits concrete and flat roofs, balconies, terraces and parapet walls.

On the tin price alone, the 15kg DESMOFLEX PU is listed at €150 against €209.95 for a 15kg tin of Lava 20 at TJ O'Mahony. Coverage per kilo is not the same across every PU, so check the data sheet consumption for the thickness you need before comparing cost per square metre.

The full system, all from the same range:

  • Primer for porous substrates: DESMOFLEX Polyurethane Primer (€30) for concrete, timber and plaster. The membrane has to go on within one to three hours of priming, so plan the day around that.
  • Epoxy primer: DESMOFLEX Epoxy Primer (€20) where the data sheet calls for it.
  • Reinforcement: polyester fabric, 20cm x 100m (€50) for joints, cracks, upstands and outlets.
  • Top coat: DESMOFLEX Top Coat (€80, 5kg), a two-part aliphatic PU that stays white under UV. Allow 120 to 250 g/m² per coat. It also goes over EPDM, PVC and asphalt once they are sealed with DESMOFLEX PU.
  • Small details: Thrakon ELASTO PU (€12) PU sealant for joints and fixings.

Sikalastic-625 N for specified jobs

When an architect, engineer or insurer wants a named system with third-party approval, Sika is the brand most Irish specifiers will recognise. Sika Ireland lists Sikalastic-625 N as a one-part, cold-applied polyurethane with no heat or flame, applied by brush, roller or airless spray. It is reinforced with glass fibre matting, holds European Technical Assessment ETA-20/1023, and is BBA certified as part of the complete Sikalastic-625 N Fully-Reinforced System.

That last point matters: the certificate covers the whole system, so use Sika's own primers, reinforcement mat and build-up if you want the approval to stand. Ask your local Sika stockist for current prices and guarantee terms.

Other liquid systems roofers get asked for

On commercial and refurbishment specs you will also see Kemper System (Kemperol), Triflex and Sika Liquid Plastics (Decothane). These are full systems with their own primers, reinforcement and finishes. Guarantees on them can depend on who installs and how the job is signed off, so check the manufacturer's installer requirements before you quote. If a spec names one of these, price that system. Do not substitute without written approval from whoever wrote the spec.

For clear finishes, D-FLEX Clear is a different tool from Lava 20. It is a transparent aliphatic PU for sealing over tiles, timber, glass, polycarbonate and stone without lifting them. The manufacturer quotes 2 to 3 coats at 500 to 700 g/m², walkable in 8 to 12 hours and fully cured in 7 days. It is handy for balconies and conservatory details where the client wants to keep the surface look.

When a sheet membrane is the better call

Liquid membranes earn their money on details: outlets, upstands, rooflights, pipe penetrations, box gutters and small balconies, where cutting and dressing sheet takes hours. On a large, simple flat roof the sums often go the other way.

  • Torch-on SBS felt: the standard Irish flat roof build for a strip and relay. A 5.5kg SBS mineral cap sheet is listed at €50 a roll, over an underlay. It needs a torch and hot works controls.
  • EPDM: a single rubber sheet, bonded cold. Quick on garages and extensions with few penetrations, and no naked flame on site.
  • GRP: a fibreglass laminate that suits walked-on roofs and neat edge trims, but needs dry weather and careful mixing.

A common approach is to lay the field in sheet and use a PU liquid for the details. Check the liquid is approved over that sheet with the right primer first. DESMOFLEX, for example, lists EPDM, PVC and asphalt as substrates once they are sealed with DESMOFLEX PU.

Checks before you swap from Lava 20

  • Substrate and primer: confirm the replacement is approved for the deck (concrete, ply, asphalt, felt, EPDM, metal) and use that manufacturer's primer. Do not mix primers between brands.
  • Thickness, not litres: price on the dry film thickness the data sheet requires, then convert to kilos per square metre. The Lava 20 ETA minimum is 1.0 mm, or 1.2 mm with mesh.
  • Reinforcement: use the system's own fabric or mat at joints, cracks, upstands and outlets, or across the whole field where the system requires it.
  • UV and colour: aromatic PU membranes usually need an aliphatic top coat on exposed roofs to stay colour stable. Check what the data sheet says for the product you are using.
  • Weather window: moisture-curing PU needs the deck dry and the right temperature band. Check the application temperature and rain-resistance time on the data sheet before you open a tin on an Irish forecast.
  • Approval and guarantee: if the client, insurer or spec needs an ETA, BBA or NSAI Agrément backed system, use the complete certified system and keep the batch numbers and photos.

Lava 20 alternative questions

Is DESMOFLEX the same as Lava 20?

No, they are different products from different manufacturers. Both are one-part polyurethane liquid membranes that cure to a seamless, bonded layer, so they do the same job on most flat roof and balcony work. Follow each system's own primer, thickness and top coat guidance.

Can I put a different liquid over old Lava 20?

Only if the new manufacturer approves coating over an existing PU membrane, and usually after cleaning, abrading and priming. Ask their technical team before you quote it.

Is liquid roofing cheaper than felt?

Rarely per square metre on a large open roof. It is often cheaper overall on small or detailed areas, because the labour saved on cutting and dressing outweighs the material cost.

Where can I buy Lava 20 alternatives in Ireland?

DESMOFLEX and D-FLEX are in our liquid roofing section from The Roofing Shop. Sika systems are sold through Sika stockists and builders merchants. Kemper, Triflex and Decothane are usually supplied through the manufacturer or their distributors.

Pricing a flat roof for a customer? Our roof repair cost guide shows what Irish homeowners are seeing quoted, and you can list your business in the roofer directory so local enquiries can find you.